provided by    JemRF.com
  • Projects
    Home
  • Install or Upgrade PrivateEyePi
  • Projects
    • - Home Alarm System project
    • - Create a database logger on a Raspberry Pi
    • - Internet Of Things (IOT) WIFI Sensor
    • - WiFi Wireless Gateway
    • - Wireless Projects
    • - Push Button for Raspberry Pi
    • - Temperature Sensor Project using DS18B20
    • - Temperature and Humidity using the DHT22 sensor
    • - Webcam Surveillance Projects
    • - On/Off Project - Switch a light on/off using your smart phone
    • - Siren Project
    • - Arm/Disarm Using a Switch
    • - LCD Projects for Raspberry Pi
    • - Flood/Water Presence Sensor
    • - Automate your alarm and sensors
    • - Home Alarm System for Raspberry Pi - How it works
    • - How to Configure Rules
    • - Usage Limits
    • - Terms and Conditions

Support

  • Discussion Forum
  • Having Problems?

Other

  • Contact Us
  • Donations
  • Facebook

https://www.facebook.com/pages/PrivateEyePi/1383466288626746


Home‎ > ‎Home Alarm System project‎ > ‎Wireless Projects‎ > ‎Wireless Sensor - FLEX RF Module‎ > ‎

Flex Tutorials



  1. Getting Started - Communicate with the Raspberry Pi RF Base Station
  2. Change the Device ID
  3. Configure RF Module Type
  4. Wake and Sleep
  5. Build a wireless temperature and humidity sensor with the DHT22 sensor
  6. Build a wireless temperature sensor with the DS18B20 temperature sensor
  7. How to use the FLEX module for remote control
  8. How to configure PrivateEyePi Rules to remotely control a FLEX module
  9. Establish communications with an Arduino

https://www.jemrf.com/products/flex-rf-module


Site maintained by Seltron LLC for JemRF.com ©2022